Hoist Controller (Low Voltage Control)
The Hoist Controller (Low Voltage Controll) manufactured by Hoist UK is specifically designed for use with a Direct Control rigging hoist and standard units are mounted in 6U 19" steel rack mount cases, with flight cases available upon request. Our host controller are suitable for hoists to BS7906 Categories A and B, BGV D8 and BGV D8+.
HUK controller (Direct Control) are fitted with the following as standard:
- Power supply: 400V / 415V / 3Ph 50/60 Hz
- Power inlet 32A 5 pin CEE form
- Four channel units have CEE form outlets
- Multi-pin outlet connectors on others
- Harting / Socopex options available
- Short circuit protection (power & control)
- Thermal protection (per four motors
- Phase sequence indicator / reverse switch
- Max power per channel: 1.8kW
Technical Information
Options available for the HUK Controller (Low Voltage Control):
- Local control - where selection switches, run Button and E stop button are fitted to the front of the control panel.
- Remote control - where selection switches, run Button and E stop button are fitted into a separate handset which plugs into the front of the control panel. Handset is fitted with 10m wander cable as standard
- Wall mounted units - all of our controllers can be housed in standard industrial steel enclosures more suitable for permanent installation, with DIN rail mounted terminations for hard wiring
- Local / Remote control - where selection switches, run button and E stop button are fitted both to the front of the panel and into a separate handset which plugs into the front of the control panel. Handset is fitted with 10m wander cable as standard
- Linkable - all of our controllers can be fitted with the link option which will allow the controllers to be linked together to form a much larger system
- Radio control - where selection switches, run Button and E stop button are fitted into a separate radio handset which allows the operator to position him / herself anywhere within 100m of the main controller reducing cabling to a minimum
- Special / bespoke controllers can be produced to meet your exact requirements
- Controllers suitable for single phase or special voltages are available on request
Make an Enquiry
RIGGING HOIST STANDARDS EXPLAINED
There are in fact several different European Standards and various codes of practice that have been written specifically to cover lifting operations within the entertainment industry, where loads are suspended overhead (static loads) or moving above people (dynamic loads) without the needs for additional safety arrangements.